Ball bearings + circlips, etc. for Papst winding motor shafts of various tape recorders (set of 8)

Appropriate replacement set of ball bearings and retaining rings for Pope winding motors in various tape recorders.

Matching replacement set of ball bearings and retaining rings for Papst winding motors in the following tape recorders: ASC AS 4500, ASC AS 5000, ASC AS 6000, Braun TG 1000, Braun TG 1020, Grundig TS1000, Revox A77, Revox B77, Revox PR99
Ball bearing: high-quality deep groove ball bearing from SKF in automotive quality (extra hardened)
Ball bearings: The synchronization behavior of the tape recorders depends, among other things, on the ball bearings.
Circlips: DIN 471 Si ring 8 stainless; inner diameter 7.4mm; Outer diameter 8mm.
The synchronization behavior of the tape recorders depends, among other things, on the ball bearings.
1x set of 4 SKF ball bearings 608 2Z and 1x set of 4 retaining rings DIN 471

€18.95*

Content: 8 Piece (€2.37* / 1 Piece)

Currently not available

worldwide shipping from €7.45
Budget Shipping just 2,95 € (domestic Germany)
One month right of withdrawal

SKU: 10094

The ball bearings or motor bearings installed in the Papst motors have a major influence on the synchronism and the sound of the tape recorder. Replacing the outdated bearings of the winding motors should be part of every overhaul. The ball bearings from SKF are a perfect replacement for the installed bearings and meet the highest requirements (automotive quality - extra hardened). When replacing the motor or ball bearings of the Papst motors, the circlips should also be replaced. With an inner diameter of 7.4mm, the circlips are perfect for replacing the circlips or circlips on the drive shaft.
Matching replacement set of ball bearings and retaining rings for Papst winding motors in the following tape recorders: ASC AS 4500, ASC AS 5000, ASC AS 6000, Braun TG 1000, Braun TG 1020, Grundig TS1000, Revox A77, Revox B77, Revox PR99