Slider set (4x long, 2x short, including base plates) for Grundig TS1000 (set of 6)
Optically and functionally matching spare part for Grundig TS1000.
- Replaces defective or broken sliders (long) of the Grundig TS1000
- including brushed aluminum inserts for an original look
- incl. base plate - assembly from the back necessary - is screwed
- High quality 3D print after CAD redesign
- Functionally and optically like the original
- Scope of delivery: 4x slider knobs (long) with aluminum insert including base plate for Grundig TS1000, 2x slider knobs (short) with aluminum insert including base plate for Grundig TS1000, 6x stainless steel screws
€72.95*
Content: 6 Piece (€12.16* / 1 Piece)
- Ships tomorrow if order is paid by 2:00 p.m
- worldwide shipping from €7.45
- Budget Shipping just 2,95 € (domestic Germany)
- One month right of withdrawal
SKU: 10096
Over time, the filigree plastic of the slider buttons on the Grundig TS1000 hardens, causing the fine tangs to break off. Another reason why the controls break off or get lost over time is when removing the front cover on the TS1000 - the sliders in particular can be damaged here, as they are built into the front panel. The knobs and sliders offered here as spare parts for the Grundig TS1000 are 3D printed (FDM) 1:1 to match the original parts. The fine resolution of the surface was achieved through the use of modern 3D printers and filaments. The laser-cut aluminum insert sheet has a brushed surface and impresses with its high-quality workmanship. Our construction is not plugged in, it is screwed. An inserted nut in the regulator knob and a stainless steel screw ensure a secure hold. The sliding behavior is exactly the same as with the original control knobs.